These two Rhodies differed from the batch of ten Moguls delivered in the previous year (Locobase 7550) in having a slightly larger grate and four fewer tubes. In 1893 the MLS&W was taken over by the Chicago & North Western and the two locomotives were renumbered.
In September 1920, the 1012 was sold to the Sever-Anderson Logging Company of Green Bay, Wisconsin.
The 929 remained with the C&NW until it was scrapped in February 1926.
A trio delivered to the MLS&W a few years after the first couple of batches, these were smaller and lighter. In 1893, the MLS&W was taken over by the Chicago & North Western for its Ashland Division.
Thirty years later all three were scrapped in April 1923.
|Principal Dimensions by Steve Llanso of Sweat House Media|
|Railroad||Milwaukee Lake Shore & Western (C&NW)||Milwaukee, Lake Shore & Western (C&NW)||Milwaukee, Lake Shore & Western (C&NW)|
|Number in Class||10||2||3|
|Road Numbers||20, 30-32, 51, 102-106/102-1006, 920, 930-32, 951||112-113/ 1012, 929||992-993, 996|
|Builder||Rhode Island||Rhode Island||Rhode Island|
|Locomotive Length and Weight|
|Driver Wheelbase (ft / m)||15.25 / 4.65||15.25 / 4.65||14.75 / 4.50|
|Engine Wheelbase (ft / m)||22.75 / 6.93||22.75 / 6.93||22.25 / 6.78|
|Ratio of driving wheelbase to overall engine wheebase||0.67||0.67||0.66|
|Overall Wheelbase (engine & tender) (ft / m)||44 / 13.41||44 / 13.41||43.42 / 13.23|
|Axle Loading (Maximum Weight per Axle) (lbs / kg)|
|Weight on Drivers (lbs / kg)||89,100 / 40,415||88,100 / 39,962||86,000 / 39,009|
|Engine Weight (lbs / kg)||103,500 / 46,947||103,500 / 46,947||98,000 / 44,452|
|Tender Loaded Weight (lbs / kg)||66,800 / 30,300||66,800 / 30,300|
|Total Engine and Tender Weight (lbs / kg)||170,300 / 77,247||170,300 / 77,247|
|Tender Water Capacity (gals / ML)||3500 / 13.26||3500 / 13.26||3000 / 11.36|
|Tender Fuel Capacity (oil/coal) (gals/tons / ML/MT)||8 / 7.30||8 / 7.30||7 / 6.40|
|Minimum weight of rail (calculated) (lb/yd / kg/m)||50 / 25||49 / 24.50||48 / 24|
|Geometry Relating to Tractive Effort|
|Driver Diameter (in / mm)||59 / 1499||59 / 1499||59 / 1499|
|Boiler Pressure (psi / kPa)||165 / 11.40||165 / 11.40||150 / 10.30|
|High Pressure Cylinders (dia x stroke) (in / mm)||18" x 24" / 457x610||18" x 24" / 457x610||18" x 24" / 457x610|
|Tractive Effort (lbs / kg)||18,484 / 8384.21||18,484 / 8384.21||16,804 / 7622.18|
|Factor of Adhesion (Weight on Drivers/Tractive Effort)||4.82||4.77||5.12|
|Firebox Area (sq ft / m2)|
|Grate Area (sq ft / m2)||18.96 / 1.76||19.30 / 1.79||17.50 / 1.63|
|Evaporative Heating Surface (sq ft / m2)|
|Superheating Surface (sq ft / m2)|
|Combined Heating Surface (sq ft / m2)|
|Evaporative Heating Surface/Cylinder Volume|
|Computations Relating to Power Output (More Information)|
|Robert LeMassena's Power Computation||3128||3185||2625|
|Same as above plus superheater percentage||3128||3185||2625|
|Same as above but substitute firebox area for grate area|